MPC Asphalt Products
Marathon Petroleum Asphalt Emulsion Group
Google Earth Outreach - Spreadsheet Mapper 3.0
Created with Spreadsheet Mapper 3

Albuquerque, NM
2040 Second Street SW
Albuquerque, NM 87102
Albuquerque, NM MPC Asphalt Terminal
Contact Central Dispatch for loading times 888-383-5375.
PG58-28 is an unmodified asphalt product used for hot mix asphalt, roofing applications or emulsion production.
PG64-22 is an unmodified asphalt product used for hot mix asphalt, emulsion, roofing applications or further modification for higher temperature paving grades.
PG64-28 is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG70-22 is a modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-22 is a modified asphalt product used for hot mix asphalt.

Big Sandy, KY
15085 Mayo Trail Rd.
Catlettsburg, KY 41129
Big Sandy, KY MPC Asphalt Terminal
Emulsion, Specialty Product, Paving Grades, Roofing
Contact the territory manager for loading times.
AE-200 Emulsion
AE-200 is an anionic, medium setting, high float emulsion with a soft penetration base. Along with AE-150 and AE-300, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing.
HFMS-2 Emulsion
HFMS-2 is an anionic, medium setting, high float emulsion. This emulsion is used in chip sealing and plant mixing.
MWS-90 Emulsion
MWS-90 is an anionic, medium setting, high float emulsion. This emulsion is used in chip sealing and plant mixing.
PG70-22PM is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-22PM is a Polymer Modified asphalt product used for hot mix asphalt.
RS-2 Emulsion
RS-2 is an anionic, rapid setting emulsion used in chip sealing.
SS-1H Emulsion
SS-1H is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.
NTT (No Track Tack)
NTT (No Track Tack) is an anionic, hard penetration grade emulsion used for tack coat. This tack coat as specially formulated to break quickly.

Canton, OH
2408 Gambrinus Ave. SW
Canton, OH 44706
Canton, OH MPC Asphalt Terminal
Contact the territory manager for loading times.
150-200 Pen is a high penetration range asphalt, typically also meeting requirements of an AC-5, approximately 500P viscosity material. This asphalt product is used as an emulsion base, in roofing applications and in blending of other PG asphalts.
PG52-28 is a 150-200 dmm penetration asphalt product with typical viscosity around 500 Poise. PG52-28 can be used in asphalt blending, as an emulsion base for manufacturing or as hot mix binder for high recycle mixtures and very cold climates.
PG64-22 is an unmodified asphalt product used for hot mix asphalt, emulsion, roofing applications or further modification for higher temperature paving grades.
Roofing Flux
Low viscosity asphalt, typically utilized in production of roofing shingles, rolled roofing, or paving grade emulsions.

Cleveland, OH
2000 Central Furnace Ct
Cleveland, OH 44115
Cleveland, OH MPC Asphalt Terminal
Contact the territory manager for loading times.
PG58-28 is an unmodified asphalt product used for hot mix asphalt, roofing applications or emulsion production.
PG64-22 is an unmodified asphalt product used for hot mix asphalt, emulsion, roofing applications or further modification for higher temperature paving grades.
PG70-22PM is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-22PM is a Polymer Modified asphalt product used for hot mix asphalt.

Detroit, MI
301 South Fort Street
Detroit, MI 48217
Detroit, MI MPC Asphalt Terminal
Contact the territory manager for loading times. Canton requires specific driving trainer since the terminal is in the main gate of the refinery for all new drivers that have never loaded at Canton. This is a one-time class. Training is held once a month. Please contact Ashley Dunbar or Robert Wallace to schedule training.
150-200 Pen is a high penetration range asphalt, typically also meeting requirements of an AC-5, approximately 500P viscosity material. This asphalt product is used as an emulsion base, in roofing applications and in blending of other PG asphalts.
PG52-28 is a 150-200 dmm penetration asphalt product with typical viscosity around 500 Poise. PG52-28 can be used in asphalt blending, as an emulsion base for manufacturing or as hot mix binder for high recycle mixtures and very cold climates.
PG58-22 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG58-28 is an unmodified asphalt product used for hot mix asphalt, roofing applications or emulsion production.
PG64-28 is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG64-28P is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG64-28PM is a Polymer Modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG70-22P is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG70-22PM is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG70-28P is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-22PM is a Polymer Modified asphalt product used for hot mix asphalt.

El Paso, TX
6550 Gateway Blvd. E.
El Paso, TX 79905
El Paso, TX MPC Asphalt Terminal
PG58-22 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG64-16 is an unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG64-28 is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG70-10 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG70-22 is a modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-16 is a Polymer Modified asphalt product used for hot mix asphalt.

Fernley, NV
425 Logan Lane
Fernley, NV 89408
PNAC, LLC Asphalt Terminal Fernley, NV

Floreffe, PA
1100 Glass House Rd
Clairton, PA 15025
Floreffe, PA MPC Asphalt Terminal
Contact Central Dispatch for loading times 888-383-5375.
PG70-22 is a modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.

Garyville, LA
4663 West Airline Highway Garyville, LA 70051
Garyville, LA MPC Asphalt Terminal
150-200 Pen is a high penetration range asphalt, typically also meeting requirements of an AC-5, approximately 500P viscosity material. This asphalt product is used as an emulsion base, in roofing applications and in blending of other PG asphalts.
PG52-28 is a 150-200 dmm penetration asphalt product with typical viscosity around 500 Poise. PG52-28 can be used in asphalt blending, as an emulsion base for manufacturing or as hot mix binder for high recycle mixtures and very cold climates.
PG67-22 is unmodified asphalt product used for hot mix asphalt, roofing applications, emulsion production or further modification for higher temperature paving grades.
AC-30 Cement
AC-30 is unmodified asphalt product, approximately 3000P viscosity used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.

Indianapolis, IN
255 N. Belmont
Indianapolis, IN 46222
Indianapolis, IN MPC Asphalt Terminal
Emulsion, Paving Grades, Specialty Product, Roofing
AE-150 Emulsion
AE-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing.
AE-90 Emulsion
AE-90 is an anionic, medium setting, high float emulsion. This emulsion is used in chip seals and less frequently, hot and cold pant mix.
PG70-22P is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades.
PG76-22P is a Polymer Modified asphalt product used for hot mix asphalt.
RS-2 Emulsion
RS-2 is an anionic, rapid setting emulsion used in chip sealing.
SS-1H Emulsion
SS-1H is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.
NTT (No Track Tack)
NTT (No Track Tack) is an anionic, hard penetration grade emulsion used for tack coat. This tack coat as specially formulated to break quickly.
PG58S-28 is an unmodified asphalt product used for hot mix asphalt, roofing applications or emulsion production.
PG 58H-28 is a Polymer Modified asphalt product used for hot mix asphalt.
PG 58E-28 is a Polymer Modified asphalt product used for hot mix asphalt.
PG64S-22 an unmodified asphalt product used for hot mix asphalt, emulsion, roofing applications or further modification for higher temperature paving grades.
PG64H-22 is a Polymer Modified asphalt product used in hot mix asphalt production.
PG64E-22 is a Polymer Modified asphalt product used in hot mix asphalt production.

Kenai, AK
54741 Tesoro Road, Nikiski AK 99635
Kenai, AK MPC Asphalt Terminal

Knoxville, TN
1808 Jones Street
Knoxville, TN MPC Asphalt Terminal
Specialty Product, Emulsion, Paving Grades, Roofing
AC-5 Cement
AC-5, approximately 500P viscosity material, is a high penetration range asphalt, typically also meeting requirements of a 150-200 dmm pen. This asphalt product is used as an emulsion base and in blending of other PG asphalts.
AE-3 is an anionic, medium setting, high float emulsion with a very soft penetration base. This emulsion is used in cold plant mix and mixed in place.
AE-200 is an anionic, medium setting, high float emulsion with a soft penetration base. Along with AE-150 and AE-300, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing.
RS-2 Emulsion
RS-2 is an anionic, rapid setting emulsion used in chip sealing.
SS-1H Emulsion
SS-1H is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.

Kuttawa, KY
2643 State Route 810 South
Kuttawa, KY 42055
Kuttawa, KY MPC Asphalt Terminal
Specialty Product, Emulsion, Paving Grades, Roofing
AC-5 Cement
AC-5, approximately 500P viscosity material, is a high penetration range asphalt, typically also meeting requirements of a 150-200 dmm pen. This asphalt product is used as an emulsion base and in blending of other PG asphalts.
AE-200 is an anionic, medium setting, high float emulsion with a soft penetration base. Along with AE-150 and AE-300, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing.
AE-3 is an anionic, medium setting, high float emulsion with a very soft penetration base. This emulsion is used in cold plant mix and mixed in place.

Louisville, KY
8600 Cane Run Road
Louisville, KY 40258
Louisville, KY MPC Asphalt Terminal
Emulsion, Paving Grades, Specialty Product, Roofing
AE-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing.
AE-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with AE-150 and AE-200, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing.
AE-90 is an anionic, medium setting, high float emulsion. This emulsion is used in chip seals and less frequently, hot and cold pant mix.
NTT (No Track Tack)
NTT (No Track Tack) is an anionic, hard penetration grade emulsion used for tack coat. This tack coat as specially formulated to break quickly.

Memphis, TN
2301 Channel Ave
Memphis, TN 38109
Memphis, TN Trumbull Asphalt Terminal
PG67-22 is unmodified asphalt product used for hot mix asphalt, roofing applications, emulsion production or further modification for higher temperature paving grades.

Meredosia, IL
State Hwy 104 West of Bridge
Meredosia, IL 62665
Meredosia, IL (IRC) Terminal
Emulsion, Specialty Product, Paving Grades, Roofing
CRS-2 Emulsion
A rapid setting emulsion designed to react quickly with aggregate. These emulsions are primarily used as chip seals and are spray applied with the chip (aggregate) applied immediately after spraying. Polymer Modified versions are used to improve chip retention and higher traffic areas.
EA-150 Emulsion
EA-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing.
EA-300 Emulsion
EA-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with EA-150, this emulsion is used in cold plant mix and mixed in place. In addition, EA-300 can be used in stockpile mixing.
HFE-150 Emulsion
HFE-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing.
HFE-300 Emulsion
HFE-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with HFE-150, this emulsion is used in cold plant mix and mixed in place. In addition, HFE-300 can be used in stockpile mixing.
HFRS-2 Emulsion
HFRS-2 is an anionic, rapid setting, high float emulsion. This emulsion is used in chip sealing.
MC-30 Cutback
MC-30 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant.
MC-3000 Cutback
MC-3000 is a moderately volatile, medium curing, high viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
MC-800 Cutback
MC-800 is a moderately volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
PEP Emulsion
PEP is an anionic, medium setting very soft base penetration emulsion. This emulsion is used as a prime to penetrate surfaces before another treatment.
PG46-28 is a 150-200 penetration asphalt product with typical viscosity around 200-300 Poise. PG46-28 can be used in asphalt blending, as a hot applied chip seal product or as hot mix binder for high recycle mixtures and very cold climates.
SC-250 Cutback
SC-250 is a low volatile, slow curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
SC-3000 Cutback
SC-3000 is a low volatile, slow curing, high viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
SC-800 Cutback
SC-800 is a low volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
SS-1 Emulsion
SS-1 is an anionic, low viscosity, soft penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.
SS-1 Emulsion Diluted 30%
SS-1H Dilute Emulsion is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.

Nashville, TN
930 Youngs Lane
Nashville, TN 37207
Nashville, TN MPC Asphalt Terminal
Specialty Product, Emulsion, Paving Grades, Roofing
AC-5, approximately 500P viscosity material, is a high penetration range asphalt, typically also meeting requirements of a 150-200 dmm pen. This asphalt product is used as an emulsion base and in blending of other PG asphalts.
AE-3 is an anionic, medium setting, high float emulsion with a very soft penetration base. This emulsion is used in cold plant mix and mixed in place.
AE-P Emulsion
AE-P is an anionic, medium setting very soft base penetration emulsion. This emulsion is used as a prime to penetrate surfaces before another treatment.
HP-2 Bio Cutback
HP-2 BIO is a high performance cold mix binder for use in the most demanding asphalt or concrete pavement maintenance or pothole patching applications. US Patent Number 6,764,542.

North Bend, OH
11001 Brower Rd
North Bend, OH 45052
North Bend, OH MPC Asphalt Terminal
Specialty Product, Paving Grades, Emulsion, Roofing
0-10 Pen is produced from SDA (Solvent Deasphalting). These SDA Bottoms are asphaltene rich resulting in typical properties of high softening point (212F+) and low penetration (typically 0 dmm) depending on the operating severity of the SDA unit. This product has many applications including roofing, emulsions and blending.
AC-7 is an asphalt blended to meet 700P viscosity and 100-160 dmm penetration.
KP-6 Cutback
KP-6 is a cutback asphalt formulated with petroleum distillates to decrease viscosity and improve coating. KP-6 is used in stockpile mixes for paving and patching.
MC-30 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant.
MC-3000 is a moderately volatile, medium curing, high viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
MC-70 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant.
PG76-22P is a Polymer Modified asphalt product used for hot mix asphalt.
S-180 Hard Pen
S-180 hard pen asphalt is blended product using 0-10 pen. The finished product is used in asphalt blending and emulsion production.

Phoenix, AZ
3050 South 19th Avenue
Phoenix, AZ 85009
Phoenix, AZ MPC Asphalt Terminal
MC-250 is a moderately volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
MC-800 is a moderately volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
PG76-16 is a Polymer Modified asphalt product used for hot mix asphalt.
SC-250 is a low volatile, slow curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.
SC-70 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant.
SC-800 is a low volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing.

Phoenix, AZ McDowell
1935 W McDowell Rd
Phoenix, AZ 85009
Phoenix, AZ McDowell MPC Asphalt Terminal
CQS-1h (1:1) Dilute Emulsion
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes.
CRS-2P Emulsion
A rapid setting emulsion designed to react quickly with aggregate. These emulsions are primarily used as chip seals and are spray applied with the chip (aggregate) applied immediately after spraying. Polymer Modified versions are used to improve chip retention and higher traffic areas.
CSS Emulsion
CSS-1 is a cationic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.
LMCQS-1h (NV) Emulsion
LMCQS-1h Emulsion
PG64-28PM is a Polymer Modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG76-22NV is a Polymer Modified asphalt product used for hot mix asphalt.
PMCQS-1h Emulsion
QSH Emulsion
QSH emulsion is used for mixing grade products.
RTE (MSE) Emulsion
SS-1H (1:1) Dilute Emulsion
SS-1H (1:1) Dilute Emulsion is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used.

Rosario, NM
967 New Mexico 16 Rd, Pena Blanca, New Mexico 87041
Rosario, NM NuStar Logistics Asphalt Terminal
PG 58-34 is an asphalt cement used in hot mix asphalt production.
PG 64-28M is a Polymer Modified asphalt product used in hot mix asphalt production.
PG 70-22M is a Polymer Modified asphalt product used in hot mix asphalt production.
PG 70-28 is an asphalt cement used in hot mix asphalt production.
PG 70-28M is a Polymer Modified asphalt product used in hot mix asphalt production.

St Louis, MO
201 E Nagel Ave
St. Louis, MO 63111
St Louis, MO BlueKnight Energy Partners Asphalt Terminal

St. Paul Park, MN
201 St. Paul Park Road
St. Paul Park, MN 55071
St. Paul Park, MN MPC Asphalt Terminal
PG64-16 is an unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.

Tampa, FL
519 South 19th Street
Tampa, FL 33605
Tampa, FL MPC Pt Ybor Asphalt Terminal
AC-20 is unmodified asphalt product, approximately 2000P viscosity, used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.
PG67-22 is unmodified asphalt product used for hot mix asphalt, roofing applications, emulsion production or further modification for higher temperature paving grades.

Tucson, AZ
4150 East Irvington Road
Tucson, AZ 85714
Tucson, AZ MPC Asphalt Terminal
HP-20 is a hard pen asphalt base used in asphalt blending and emulsion production.
PG64-16 is an unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades.

Viney Branch, KY
Ashland Oil Dr
Catlettsburg, KY 41129
Viney Branch, KY MPC Asphalt Terminal
Contact Central Dispatch for loading times 888-383-5375.
0-10 Pen is produced from SDA (Solvent Deasphalting). These SDA Bottoms are asphaltene rich resulting in typical properties of high softening point (212F+) and low penetration (typically 0 dmm) depending on the operating severity of the SDA unit. This product has many applications including roofing, emulsions and blending.

Wellsville, OH
21st
Wellsville, OH 43968
Wellsville, OH MPC Asphalt Terminal